Polaris 440 IQ Скачать руководство пользователя страница 19

Страница: 19 / 118

SAFETY

Operator Safety

Drive Belt

Do not operate the engine with the drive belt removed.

Any servicing that requires operation without a belt must be performed

by your dealer. Operation of the engine with the belt removed may

result in injury or damage to the engine.

Intake Silencer

Do not operate the engine with the intake silencer or filter removed.

Damage to the engine may occur if the intake silencer or filter are

removed.

Clutches

Do not attempt to service the clutches.

All clutch service must be performed by your dealer. The clutch is a

complex mechanism that rotates at high speeds. Each clutch is

dynamically balanced before installation. Any tampering may disrupt

this precision balancing and create an unstable condition.

Cold Weather Drive-Away

Whenever your snowmobile has been parked for a length of time,

especially overnight, always make sure the skis and track are loosened

from ice and snow before attempting to drive. Apply the throttle with

enough authority to put the machine into motion, but always operate

within safety limits.

Maneuverability

While much control and maneuverability is achieved through the

steering system and skis, maximum control is achieved by the shifting

of your body weight. Maneuverability will change for lighter operators

or machines designed to carry a load.

Содержание 440 IQ























































































































Результаты поиска

Содержание 440 IQ

Отзывы:

Похожие инструкции для 440 IQ

Бренды по названию

Популярные бренды

Polaris 440 IQ, Руководство пользователя

Результаты поиска

Содержание 440 IQ

Отзывы:

Похожие инструкции для 440 IQ

Бренды по названию

Популярные бренды