Polaris 440 IQ Скачать руководство пользователя страница 17

Страница: 17 / 118

SAFETY

Operator Safety

Ice and Snow Build-up

WARNING

Ice and snow build-up may interfere with the steering of your

machine, resulting in serious injury or death. Keep the

underhood area free of snow and ice.

Before driving, manually turn the skis to the left and right to be sure

ice and snow are not interfering with full left and right steering. If

difficulty is encountered, remove ice and snow build-up that may be

obstructing the steering linkage.

Driving on Slippery Surfaces

WARNING

Never attempt an abrupt change of direction when operating on

slippery surfaces. Proceed slowly and use extra caution.

Driving on ice or hard-packed snow reduces steering and braking

control, which may result in loss of control and serious injury or

death. Slow down and use extra caution when operating on

slippery surfaces.

Driving Downhill

When riding downhill, shift your weight to the rear of the machine and

reduce your speed to a minimum. Apply just enough throttle to keep

the clutch engaged, allowing the engine’s compression to help slow the

machine and keep it from rolling freely downhill.

WARNING

When driving on long downhill stretches, pump the brakes.

Riding the brakes may cause the brake system to overheat,

which may result in brake failure.
Excessive or repetitive use of the brakes for high speed stops will

also cause an overheated brake system. This condition may lead

to a sudden loss of brakes and/or fire and may result in serious

injury or death.

Содержание 440 IQ























































































































Результаты поиска

Содержание 440 IQ

Отзывы:

Похожие инструкции для 440 IQ

Бренды по названию

Популярные бренды

Polaris 440 IQ, Руководство пользователя

Результаты поиска

Содержание 440 IQ

Отзывы:

Похожие инструкции для 440 IQ

Бренды по названию

Популярные бренды