Polaris 2004 RMK Скачать руководство пользователя

Страница: 40 / 127

THE PERFECT FIT

Handlebar Adjustments

Standard Handlebar

Follow these steps to adjust the handlebar for a personal fit.
1. Remove the handlebar cover to

access the four adjuster block bolts (A).

2. Using a 7/16

″

(11 mm) wrench, loosen

the four nuts on the bottom of the

adjuster block (turn the handlebar either

left or right for access to the rear nuts).

NOTE:

It may be necessary to pry the

adjuster blocks apart with a screwdriver.
3. Adjust the handlebar to the desired angle. Be sure the handlebar,

brake lever and throttle lever operate smoothly and do not hit the gas

tank, windshield or any other part of the machine when the handlebar

is turned fully to the left or right.

4. Torque the handlebar adjuster block bolts to 11-13 ft. lbs.. (15-17.6

Nm).

5. Replace the handlebar cover.

Handlebar with Riser Block

1. Remove the handlebar cover to expose

the handlebar mounting hardware.

2. Using a 1/2” wrench, loosen the two

bolts on the bottom of the riser or the

two bolts on the top of the riser,

depending on the type of adjustment

required.

3. Adjust the handlebar to the desired

angle. Be sure the handlebar, brake

lever and throttle lever operate

smoothly and do not hit the gas tank,

windshield or any other part of the

machine when the handlebar is turned fully to the left or right.

4. Torque the handlebar adjuster block bolts to 11-13 ft. lbs. (15-17.6

Nm).

5. Replace the handlebar cover.

Содержание 2004 RMK
































































































































Результаты поиска

Содержание 2004 RMK

Отзывы:

Похожие инструкции для 2004 RMK

Бренды по названию

Популярные бренды

Polaris 2004 RMK, Руководство пользователя

Результаты поиска

Содержание 2004 RMK

Отзывы:

Похожие инструкции для 2004 RMK

Бренды по названию

Популярные бренды