Polaris 2004 RMK Скачать руководство пользователя страница 42

Страница: 42 / 127

THE PERFECT FIT

Accessories

Traction Products

Another way to tailor your machine is to install traction products. See

your dealer about installing studs and/or carbides. Many tracks with

deep lug designs cannot be studded, but your dealer will be able to

offer advice and assistance.

NOTE:

Before equipping your machine with traction products, be

aware of the laws in your area pertaining to the use of traction

products.
Track studding will enhance braking control on hard-packed snow or

ice, but extreme caution is still required on such surfaces. Steering

ability may be reduced on hard-packed snow or ice.

Installing studs on models without wear strips will result in damage

to the cooler or tunnel. Always ensure that wear strips are installed

before installing studs. Always install the Polaris-approved

Switchback Wear Strip Kit before installing studs on a Switchback.

See your dealer for more details.

CAUTION

Loss of control can result in serious personal injury or death.

Proper balance of traction products on the skis and track must be

maintained to obtain proper vehicle control on hard-packed snow

or ice. See your dealer for assistance.

WARNING

Use of studs longer than the recommended length on machines

equipped with coolers will result in damage to the cooler or tunnel.

Always use the recommended length studs.

CAUTION

Содержание 2004 RMK
































































































































Результаты поиска

Содержание 2004 RMK

Отзывы:

Бренды по названию

Популярные бренды

Polaris 2004 RMK, Руководство пользователя

Результаты поиска

Содержание 2004 RMK

Отзывы:

Бренды по названию

Популярные бренды