Polaris 2004 RMK Скачать руководство пользователя

Страница: 24 / 127

SAFETY

Safety Decals and Locations

Warning decals have been placed on the snowmobile for your

protection. Read and follow the instructions of the decals and other

warnings on the snowmobile carefully. If any of the decals depicted in

this manual differ from the decals on your snowmobile, always read

and follow the instructions of the decals

on the snowmobile

If any decal becomes illegible or comes off, contact your Polaris dealer

to purchase a replacement. Replacement

safety

decals are provided by

Polaris at no charge. The part number is printed on the decal.

Clutch Cover Warning

This warning decal is found

under the hood

on the clutch cover:

Do not operate engine with hood open.
Do not attempt adjustment with engine running.
Do not operate engine with this guard open.
Never run engine with drive belt removed.
Never service clutches yourself - see your dealer.

Airbox Warning

This warning decal is found

under the hood

on applicable models:

Do not operate above 40 mph with hood-to-airbox

foam removed or engine failure will result.

Pressure Cap Warning

This warning decal is found

under the hood

on the pressure cap of

liquid cooled models:

Do not open hot. Test or replace when changing

coolant. Press down and turn to release cap. 13 PSI

Passenger Warning

Your Polaris snowmobile is

designed for a single rider only.

A decal on the

console

indicates

single rider operation:

This vehicle is designed

for operator only.

NO PASSENGER.

Содержание 2004 RMK
































































































































Результаты поиска

Содержание 2004 RMK

Отзывы:

Похожие инструкции для 2004 RMK

Бренды по названию

Популярные бренды

Polaris 2004 RMK, Руководство пользователя

Результаты поиска

Содержание 2004 RMK

Отзывы:

Похожие инструкции для 2004 RMK

Бренды по названию

Популярные бренды