Polaris 2002 Snowmobile Скачать руководство пользователя страница 35

Страница: 35 / 181

SAFETY

Safety Decals And Locations

Operation Warning Decal Text:

Read and understand warnings and the Owner’s Manual before

operation. Severe injury or death can result from not heeding the

warnings.

Never consume alcohol or drugs before or while operating this ve-

hicle.

Night riding, limited visibility, or excessive speeds may cause over-

driving of headlights resulting in insufficient time to react to terrain

changes or avoid unexpected obstacles.

This vehicle is capable of high speeds. Buried objects or uneven

terrain can cause loss of control. Exercise extreme caution when

operating in unfamiliar terrain.

This vehicle is designed for adult use only. The vehicle size, speed

capabilities and control requirement prohibit operation by children.

Operating this vehicle with a passenger (On approved models only)

reduces your ability to control the vehicle due to the added weight

and change in weight distribution. Reduce vehicle speeds and al-

low added space for maneuvering, since steering control may be

reduced.

Always wear an approved helmet, eye protection and adequate

clothing while operating this vehicle.

The Auxiliary Shut Off Switch is the primary means of stopping this

vehicle in case of an emergency and is located on the top of the

throttle control assembly. Depress the switch to stop the engine

and vehicle. Routinely check this switch for proper function with

the engine idling.

The steering and braking ability are greatly reduced when operating

on hard-packed snow, ice or when crossing roads. Reduced speed

and extra care are required to maintain vehicle control.

Carbide skags and studs enhance vehicle control on ice or hard-

packed surfaces. Care must be taken to maintain a proper balance

of ski carbides to track studs to maintain proper vehicle control.

(See the Owner’s Manual for proper use of traction accessories.)

Never permit a guest to operate this vehicle unless the guest has

read the Owner’s Manual and warnings.

Содержание 2002 Snowmobile






















































































































































































Результаты поиска

Содержание 2002 Snowmobile

Отзывы:

Похожие инструкции для 2002 Snowmobile

Бренды по названию

Популярные бренды

Polaris 2002 Snowmobile, Руководство пользователя

Результаты поиска

Содержание 2002 Snowmobile

Отзывы:

Похожие инструкции для 2002 Snowmobile

Бренды по названию

Популярные бренды