Polaris 2002 Snowmobile Скачать руководство пользователя страница 33

Страница: 33 / 181

SAFETY

Safety Decals And Locations

Standard Reverse Warning Decal - 6

Some Polaris snowmobiles are equipped with reverse. These models

will have a reverse warning decal(s) above the instrument housing.

The decals shown here are provided for identification and location

purposes only. The text found on the decals is:

VEHICLE CAPABLE OF EXCESSIVE REVERSE SPEED!

Reverse operation may be

dangerous even at low

speeds. Steering control

becomes difficult in

reverse. Misuse of

reverse may result in

injury. Avoid turning at

sharp angles in reverse.
Transmission may not

always be in the gear

indicated by the shift lever.

Always apply throttle

slowly.
On machines with reverse it is especially important to maintain

track tension as specified in the Owner’s Manual. If specified track

tension is not maintained severe damage to the machine may

occur, which may result in loss of vehicle control. Loss of vehicle

control may result in severe personal injury or death.
For more information: See Operator’s Safety and Maintenance

Manual supplied with reverse kit.

SHIFT PATTERN

Make sure lever is shifted completely to forward or reverse

position. Do not force into reverse. If not able to shift to reverse,

apply throttle gently to move vehicle. CAUTION: Do not attempt

to shift until machine has come to a complete stop or chaincase

damage may occur.

Содержание 2002 Snowmobile






















































































































































































Результаты поиска

Содержание 2002 Snowmobile

Отзывы:

Похожие инструкции для 2002 Snowmobile

Бренды по названию

Популярные бренды

Polaris 2002 Snowmobile, Руководство пользователя

Результаты поиска

Содержание 2002 Snowmobile

Отзывы:

Похожие инструкции для 2002 Snowmobile

Бренды по названию

Популярные бренды