Polaris 2002 Snowmobile Скачать руководство пользователя страница 18

Страница: 18 / 181

SAFETY

Operator Safety

Do Not Overload Cargo Carrier

Too much weight on the rear of the machine may reduce your ability to

steer. Do not exceed carrier and rack weight limits, and do not allow a

passenger to sit on the seat back or the cargo carrier.

Always Wear Clothing Designed for Snowmobiling

Be aware of the weather forecast and especially the wind chill. A table

is provided on page 26 for your reference. To better enjoy your ride,

be prepared, warm, and comfortable.

Control becomes more difficult with two people on board. More

space is required to make turns, and longer distances are needed

for stopping. Make sure the passenger remains seated behind the

driver, facing forward, with both feet placed firmly on the running

boards. Slow down and avoid “jumping” your snowmobile.

WARNING

Loose clothing or long scarves may

easily become entangled in moving

parts and cause serious personal injury.
Always wear an approved helmet and

eye protection.

WARNING

Содержание 2002 Snowmobile






















































































































































































Результаты поиска

Содержание 2002 Snowmobile

Отзывы:

Похожие инструкции для 2002 Snowmobile

Бренды по названию

Популярные бренды

Polaris 2002 Snowmobile, Руководство пользователя

Результаты поиска

Содержание 2002 Snowmobile

Отзывы:

Похожие инструкции для 2002 Snowmobile

Бренды по названию

Популярные бренды