Polaris 2002 Snowmobile Скачать руководство пользователя страница 23

Страница: 23 / 181

SAFETY

Operator Safety

Riding Downhill

When riding downhill, shift your weight to the rear of the machine and

reduce your speed to a minimum. Apply just enough throttle to keep

the clutch engaged, allowing the engine’s compression to help slow the

machine and keep it from rolling freely downhill.

Do Not Operate Engine With Clutch Guard Removed

The clutch guard is designed to protect the operator from metal parts if

the clutch should fail. Although the chance of failure is extremely

remote, don’t defeat the purpose of the guard by removing it. It’s

provided for your safety.

Do Not Operate Engine With Drive Belt Removed

Any servicing that requires operation without a belt must be performed

by your dealer. Operation of the engine with the belt removed may

result in personal injury or damage to the engine.

When driving on long downhill stretches, pump the brakes. Riding

the brakes may cause the brake system to overheat, which may

result in brake failure.
Excessive or repetitive use of the brakes for high speed stops will

also cause an overheated brake system. This condition may lead

to a sudden loss of brakes and/or fire and may result in serious

injury or death.

WARNING

Содержание 2002 Snowmobile






















































































































































































Результаты поиска

Содержание 2002 Snowmobile

Отзывы:

Похожие инструкции для 2002 Snowmobile

Бренды по названию

Популярные бренды

Polaris 2002 Snowmobile, Руководство пользователя

Результаты поиска

Содержание 2002 Snowmobile

Отзывы:

Похожие инструкции для 2002 Snowmobile

Бренды по названию

Популярные бренды