iNS/iDS 2-Wire System Manual
350-077
Rev. D - 1/20/2021
Page 38 of 107
5.9
Viewing iCCU-X2 Information
From the main menu, select iCCU Configuration,
then select Info/Diagnostics. The Info screen
displays basic information about the iCCU-X2
including its Serial Number and Firmware Version.
If you tap on the button
for “View All iCCU
Information” you will be presented with a dialog
which displays all factory and user-settable
settings. This information is also prepended to the
health log when exported to file.
The Info screen also contains buttons which will
allow remote restarting of the iCCU unit as well as
the ability to clear out all phase assignments which
appear in the Phase Setup screen. This is useful
if the iCCU was used in a previous intersection
and must be repurposed in a new intersection.
5.10
Ped Isolator
Select Ped Isolator Switches in the iCCU Configuration menu. From this screen, single calls can be placed on individual
phases by tapping the Call button. Also, calls can be locked in for any phase. As long as the lock call switch is activated,
the call will remain locked, even after disconnecting from the Wi-Fi connection. The iCCU-X2 will continue to lock calls
until the switch is deactivated or the iCCU-X2 is power-cycled.
This screen is accessible on the PC App, iOS App and also on the front LCD panel of the iCCU-X2.