Instruction manual RT 2014
POL-EKO-
APARATURA sp.j. • ul. Kokoszycka 172 C • 44-300 Wodzisław Śl. • tel./fax +48/ 32 453 91 70 • e-mail
19
Stages of fitting installation:
Installation part should be screwed to console
using M3 screws (6mm long) (A) to prepared
holes in the data logger(D).
Wall part should be installed to the flat surface
using screws, dowels or in different way (ac-
cording to surface. Holes (B) should be drilled.
Installation with glue should be performed on a
dry surface.
Handle adjustment mechanism allows to tilt the
data logger. Tilt adjustments should be per-
formed by setting the recorder at the desired
position and then tighten screw (C).
To install the data logger to fitting, assemble
outlet (E) to holes (D), pressing and moving
down.
12 CLEANING AND MAINTENANCE
To keep the aesthetic appearance of the device, it must be occasionally cleaned. Painted elements
and the panel should be cleaned with a wet cloth. Do not allow the passage of water into the device
and SIM card slot and microSD. Keep the water out of the interior and SIM card slot and micoSD card
slot.
A
D
E
C
B