Instruction manual RT 2014
POL-EKO-
APARATURA sp.j. • ul. Kokoszycka 172 C • 44-300 Wodzisław Śl. • tel./fax +48/ 32 453 91 70 • e-mail
12
6.1
Display
Main view of the RT2014
On the display the following icons can be shown:
– the device is not logged in GSM / WIFI network. The cause could be: no SIM card, damaged
SIM card, out of range, wrong settings WIFI network,
– the device is logged in GSM network. Quantity of vertical lines shows the strength of signal
– no SIM card,
– no typed or incorrect PIN code,
– temperature for a given sensor has risen above the value set in the application ('High'),
– temperature for a given sensor has decreased below the value set in the application (‘Low’),
– signalling of alarm event,
– the device is connected to a power source,
– battery status, growing symbols indicates battery charging,
– flashing icon indicates lack of microSD card
– micro SD card icon: continuous light – card is inserted, light flashes – saving data to the card
– sending text messages in progress. Index after icon @ indicates,on which emergency number
– calling in progress. Index after icon @ indicates on which emergency number
– sensor number
– temperature value
– Time / Date.
6.2
Actualization of the software
Software actualization should be made in the following order:
1. Make sure that the battery is charged,
In order to reduce power consumption, while running on battery after 1min screensaver
activates which will alternately displays temperature and time in different locations of the
display.
Actualization of all loggers has to be made only with microSD card with a capacity
of 2GB!