background image

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE

Phone: +33 (0)3 37 49 53 000 - Email: [email protected] - Web: www.pok-fire.com

MIXY EDUCTOR

 

Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP

5

MOP_PRO_02341_EN_A 08/07/2021 - Cop

yright© POK S

A

S - Illustr

ations are only informativ

e

Warning

 

- Maintenance on the material while under pressure.

Never go over the indicated maximum flow rate and pressure, it could result in injuries 

to people and/or damages to the eductor.

The frost damages can be irreversible, drain the eductor at low temperature (near 0°C and 

below).

3.3 • Use

An proper usage of POK material implies following the indicated use and maintenance instructions. 

Please follow each instruction listed in this user manual. 

The equipment should not be used if a component is damaged or missing 

Work pressure is 10 bar at the inlet of the eductor. Efficiency and safety of the material 

is  not  guaranteed  beyond  this  value.  Non-compliance  with  safety  instructions  and 

use of the material over the recommended pressure can be dangerous and even cause 

death.

3.4 • Limits of use 

Our eductors are guaranteed for a maximum working pressure of PN 16. Without explicit written authorization 

from POK, the warranty will be void if the pressures listed above are exceeded.

3.5 • Spare Parts

Regarding spare parts, only use POK parts and accessories.

3.6 • Safety elements 

It is forbidden to render safety features inoperative, to modify them or to use them in an opposite manner 

to their purpose.

4 • Liability

POK's liability is excluded for all damages caused by its material and its accessories because of an improper 

use or because operated by non-qualified or not enough qualified people. Any claim from third parties is also 

excluded. 

POK cannot be held liable for consequences resulting from a change, made on the mechanical and electrical 

part and also on the software, by the user without written authorization from POK.

4.1 • Obligations

The owner of POK's material shall bring the instructions written in this manual to the attention of all people 

likely to handle, use, install or do maintenance on this material.

The user manual has to be stored near the material for further consultation all along the life of the eductor.

Содержание MIXY Eductor





















Отзывы: