POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: +33 (0)3 37 49 53 000 - Email: [email protected] - Web: www.pok-fire.com
MOP_PRO_02341_EN_A - 08/07/2021 - Cop
yright© POK S
A
S - Illustr
ations are only informativ
e
MIXY EDUCTOR
-
Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
14
Maintenance
• Dismantling inlet/outlet cones
1 -
Unscrew the stop (mark 5).
2 -
Replace the gasket R18 if necessary (mark 4) with a new one and grease it before reassembling the
components
3 -
Remove the filter holder ring (mark 30).
4 -
Unscrew the stop (mark 3) Replace the gasket R21 if necessary (mark 2) grease the gasket before
reassembling the components
5 -
Clean the suction chamber with a hook or a cleaning brush.
6 -
Grease the gaskets and reassemble the components in the reverse order.
MARK
QTY
DESCRIPTION
CODES
1
1
BODY OF EDUCTOR
31447
2
1
O’RING R21
-
3
1
ENTRANCE CONE
39072
4
1
O’RING R18
-
5
1
EXIT CONE
39073
29
1
FLAT GASKET FOR BOTTOM THREAD 2” BSP
25727
30
1
FILTER 2”
31405
Maintenance operation of the device must be done with water supplies cut off and
system drained.
