POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE
Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr
5
MOP_LAM_01403_EN_A - 24/02/2017 - Cop
yright© POK S
A
S - Illustr
ations are only informativ
e
AQUASTAR
- High pressure hand nozzle with selectable flow rate and stream pattern, 180 lpm, spinning teeth
AQUASTAR
- High pressure hand nozzle with selectable flow rate and stream pattern, 180 lpm, spinning teeth
Warning
If the equipment is repaired, the spare parts must be supplied by POK SAS. Otherwise, the technical
specifications in this document will no longer be valid, the warranty will be invalid and the manufacturer’s
responsibility will no longer be committed.
If a maintenance operation leads to a deterioration of parts, the guarantee may not be applicable if the
procedure is not carried out in accordance with this manual.
Although it is not explicitly stated in instructions, use and wear of protective equipment are obligatory during
maintenance operations. POK SAS cannot be responsible for any damage or accident which may occur during
the dismantling. If this obligation is not met, please refer to the tools instructions guides for more details.
Only POK is able to guarantee proper functioning and security of the equipment following a disassembly.
Accordingly, POK SAS cannot be held liable for any incidents caused as a result of the dismantling outside
of its workshops.
Do not modify the equipment, it may not work properly or be dangerous for use. Any modification not
approved by POK SAS will void the warranty.
• Use
Please respect the technical limitations of the equipment.
The equipment should not be used if a component is damaged or missing.
Disrespect of safety instructions and use of the branchpipe over the recommended pressure
can be dangerous and even cause death.
It is important to know and respect the safety rules regarding your operating environment.
In case of fire that occurs near or caused by electrical installations, it is imperative to:
1) Cut of power supply as soon as possible
2) Maintain a safe distance of at least 1 meter up to 1,000 bolts.
3) To use a spray with a minimum 30° angle.
Before placing the nozzle in service, check :
1) No part is damaged, broken or missing.
2) that the coupling is perfectly connected to the hose.
3) that the swivel fitting freely.
4) the opening and closing of the valve.
5) That the flush ring works properly
6) That the flow pattern selector rotates and slides properly.
POK SAS is not responsible of any accident that may occur during operation caused by improper use or non-
compliance with safety requirements.
• Limits of use
Our nozzles are guaranteed for a maximum operating pressure of PN 40.
Our nozzles are guaranteed to resist a maximum of 60 bar in a closed position.
Without explicit written authorization from POK, the warranty will be void if the pressures
listed above are exceeded.
