background image

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr

11

MOP_LAM_01403_EN_A - 24/02/2017  - Cop

yright© POK S

A

S - Illustr

ations are only informativ

e

AQUASTAR 

- High pressure hand nozzle with selectable fl ow rate and stream pattern, 180 lpm, spinning teeth

AQUASTAR 

- High pressure hand nozzle with selectable fl ow rate and stream pattern, 180 lpm, spinning teeth

Control and operating

Instructions for use

Note: To obtain optimal performance, respect the following limits: 

 

- Flow rate: 180 lpm 

 

- usage pressure: 20 bar

• Before applying pressure

- 1 - Verify that there are no missing or damaged pieces. 

- 2 - Check that the fi re nozzle is correctly connected to a water supply.

• Openning

The shutoff handle allow a smoth opening and closing, and avoid water 

hammer.

NARROW SPRAY

• Adjusting the fl ow rate and fl ush

Adjustable fl ow rate and fl ush by swivelling fl ow rate ring. The available 

fl ow rates are engraved on the fl ow rate adjustment ring. By rotating the 

ring to the desired setting, the fl ow rate will be set to this value at the 20 

bar (290 PSI) reference pressure.

A tactile indicator permits the user to know the maximum fl ow setting 

even in total darkness and while wearing fi refi ghting gloves (conform to 

EN 659).

This ring also has a position marked FLUSH. This position permits the 

removal of particles which could interfere with the proper hydraulic 

operation of the nozzle.

• Jet adjustment

Selectable stream pattern: a continuous rotation of the head ring allows 

the user to progress from a straight stream to a narrow spray "Flash 

Over” (35°), to a full fog diffusion cone (130°) forming a wall of water.

 Tactile and visual indicators permit the user to know the type of stream 

even in total darkness and while wearing fi refi ghting gloves.in compliance 

to standard EN 659.

Position

55 lpm

Position

FLUSH

Position

110 lpm

Position

180 lpm

STRAIGHT STREAM

FULL FOG DIFFUSION

Содержание AQUASTAR

















Отзывы: