POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE
Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr
MOP_LAM_01403_EN_A - 24/02/2017 - Cop
yright© POK S
A
S - Illustr
ations are only informativ
e
4
AQUASTAR
- High pressure hand nozzle with selectable flow rate and stream pattern, 180 lpm, spinning teeth
Warning
• Note
POK SAS reserves the right to change or modify the specifications of its products at any time to incorporate
the latest technological and regulatory developments. The information contained in this document is subject
to change without notice.
• General Warning
Before using or installing the equipment, it is essential for the safety of people and
equipment, to read the information contained in this operating manual before using
the equipment. The use, maintenance, or any other operation of the equipment,
must be carried out exclusively by personnel informed of safety rules and trained in
the use of this material.
The non-compliance of safety instructions can be dangerous and cause serious
bodily harm and/or property damage.
• Security
This symbol indicates important safety tips. Pay careful attention to prevent serious bodily
harm and/or property damage.
This symbol indicates instructions that must be observed to ensure smooth operation of the
device. Please always make sure to follow all the necessary precautions.
This symbol indicates useful information to know and understand the correct operation of the
device.
• Introduction
Please read the information contained in this manual before using or operating the equipment.
The use, maintenance or any other operation of the equipment, must be carried out exclusively by personnel
informed of safety rules and trained in the use of the equipment.
While using the fire nozzle (use, maintenance, installation, ...) it is important to wear personal protective
equipment.
• Dismantling and Warranty
This product is guaranteed for a period of one years for any manufacturing defect, except with special
written agreement.
The exploded views and parts lists are not a dismantling manual.
Any dismantling or maintenance operation of the device must be done with the water supply turned off.
Dismantling and/or modification of the equipment outside POK SAS factory is allowed only in compliance
with procedures described in this manual, and therefore does not affect the warranty.
