Poettinger EUROTOP 421 A TOPTECH PLUS Скачать руководство пользователя

Страница: 25 / 32

- B1 -

1400_ GB-ANHANGB_GELENKWELLE_282

PTO ShafT

Supplement - B

Instructions for working

The permissible pto speed may not be exceeded when

using the implement.
- The hitched implement may continue to run after the

pto is switched off. Work may only be performed once

it has reached complete standstill.

- The cardan shaft must be put down or secured using a

chain when the implement is parked. Do not use safety

chain (H) to suspend the cardan shaft.

wide-angle joint:

  Maximum angle in operation and at standstill 70°.
Standard joint :
  Maximum angle at standstill 90°.
  Maximum angle in operation 35°.

maintenance
Replace work covers immediately.

- Lubricate with a brand-name grease before starting

work and every 8 hours worked.

- Before any extended period of non-use, clean and

lubricate driveshaft.

For winter working, grease the tube guards, to avoid

them freezing together.

Adapting cardan shaft

The correct length is determined by comparing both cardan

shaft halves.

Procedure for cutting to length

- To adjust length, hold cardan shaft halves next to each

other in the shortest operating position (L2) and mark.

Caution!

• Note the maximum operating length (L1)

- -Try for the greatest possible tube overlap (min. 1/2

•  Shorten the inner and outer safety tube equally
•  Attach overload fuse (2) to the machine!
•   Always  check  that  cardan  shaft  locks  are  securely

engaged before starting work.

Safety chain

- Use chain to prevent cardan shaft safety tube from

rotating.

Ensure sufficient swivel space for the cardan shaft!
- Crosscut the safety chain so that it cannot reel around

the cardan shaft or get entangled in other rotating parts.

Be advised!

Only use the

cardan shaft sup-

plied or stated;

otherwise the

warranty claims

for any damage

are not valid.

Содержание EUROTOP 421 A TOPTECH PLUS

































Результаты поиска

Содержание EUROTOP 421 A TOPTECH PLUS

Отзывы:

Похожие инструкции для EUROTOP 421 A TOPTECH PLUS

Бренды по названию

Популярные бренды

Poettinger EUROTOP 421 A TOPTECH PLUS, Руководство оператора

Результаты поиска

Содержание EUROTOP 421 A TOPTECH PLUS

Отзывы:

Похожие инструкции для EUROTOP 421 A TOPTECH PLUS

Бренды по названию

Популярные бренды