-9-
12.
OPERATING PROCEDURES
Two modes of operation are provided; normal handset mode where the handset is
lifted and replaced in the normal manner and headset mode where the caller or
called party is heard through the headset.
When making or receiving a telephone call, you can alternate between the two
modes of operation.
On dialling the required telephone number, the display will change to indicate the
dialled number. After a short period of time, the display will show, Auto Timer. If the
number has more than 10 digits, the display will scroll to the left and only the last 10
digits of the number will be shown. When the call is completed the display will revert
to current time.
The display shows:
12.1 HANDSET OPERATION
Pick up the handset and if making a call, await dial tone and dial the required
telephone number. On completion of the call, replace handset in cradle.
12.2 ON-HOOK OPERATION
When the telephone rings, press the On-Hook button to hear the calling party. To
make a call, press the ON-HOOK button, await dial tone and dial the required
telephone number. On connection of the call pick up the handset to speak. To
change from ON-HOOK mode to HANDSET MODE, pick up the handset. Replacing
the handset in the cradle will clear down the line when you have completed the call.
During ON-HOOK mode, the LED indicator will light up.
12.3 LAST NUMBER REDIAL
If the telephone number you have called is engaged or if you want to repeat the call
to the number you dialled previously, lift the handset or use the handsfree mode,
await dial tone and press the REDIAL LNR button. The previously dialled number will
be AUTOMATICALLY RE-DIALLED. Up to 32 digits can be stored in the REDIAL LNR
memory. The re-dialled number will appear in the display. If the number contains
more than 10 digits, only the last 10 will be displayed.
PM
Recall
change
✽
#
or
(TBR)
to Tone
pause
dialling
NR203HPUK User Guide 5/6/03 11:13 am Page 11
