1
9
9. Our guarantee does not cover damage due to improper installation or
component parts
loss
.
10. We recommend installing the gas sensor with the plug & play valve. No
changes needed.
1
.
If the screws and washers come in contact with water or chemicals, it is
necessary to clean them to prevent corrosion;
2
.
If the product is installed fully or partially outside, it is recommended to
protect it against water;
3
.
The transparent cover is designed to protect against accidental actuation
of the red button.
Connect valve and gas sensor through plug in jack (plug & play) without any
adjustments. Both products can be adapted for other valve type devices or
sensor if you change sleeve system.
A. Black wire connects to “-”
B. White wire connects to “+“
C. The power supply is 2
3
0V dc
Cautions
Connecting the gas detector with th
e
electromagnet
ism
valve
