EN
3
2.1 Main unit description
Index
AItem
Description
1
Display screen
2 digit display. Displays the main system status.
2
Keyboard
For configuration and commands
3
Speaker
Voice message and sounds
4
Arm / Partial Arm (Intelligent) / Disarm /
Alarm buttons
The buttons allows activation of main functions
described on the unit keypad.
5
Phone line 1
This connector is generally used to connect a
landline telephone .
6
Phone line 2
This connector is generally used to connect a
phone to same landline.
7
Siren plug
Connect included siren to this plug .
8
12 V power supply
Connect included power supply to this
connector.
9
Backup battery On/Off switch
This switch allows On/Off connection of backup
battery inside.
2.2. Remote control description
Press
key to arm system. In this arming mode the system fully protects premises . Trigger any sensor
will cause system alarm, and if it’s connected to a land phone line, it will also triggers a emergency phone
call to the configured numbers.
Press
key to stay arm system. More precisely only perimeter door and window sensors. This mode
allows you to stay inside the protected area (in the house for example), and be protected by the alarm
system in the event of an outside intrusion attempt. Indoor sensors will not be active .
Press
to disarm system, stop siren if alarm, and changing status to Disarmed mode. After this operation
none of the normal set detectors will trigger an alarm.