PNI Corsa X441, Руководство по эксплуатации

Страница: 12 / 32

10
When to calibrate
The Corsa Digital Compass must be
calibrated under the following conditions:
1. It is being used for the first time.
2. The magnetic distortion icon,
“
DISTORTION
,” is continuously displayed.
3. The unit is reset.
4. The battery is removed or replaced.
Steps to calibrate
1. Press the
ADV
button until the
BASIC
icon is displayed in the upper right
corner.
2. Press and hold the
ADV
button and
“
CAL
” will flash. This indicates you are
now in calibration mode.
3. Press the
ENT
button and the “
TURN
TWICE
“ indicator will flash in the bottom
right corner, and the arrow on the
compass rose moves around the circle.
In Corsa model X473, the backlight will
momentarily turn on and off before
“
TURN TWICE
“ flashes.
4. Holding your Corsa Digital Compass
level, slowly turn around in complete two
circles and then press
ENT
. Each circle
BASIC MODE