0507061510/010921/C SparkShield
4
3
SAFETY
Intended use
1
The product has been designed for removal of
sparks from metal and grinding processes. Using
the product for other purposes is considered
contrary to its intended use. The manufacturer accepts no
liability for any damage or injury resulting from such use. The
product has been built in accordance with state-of-the-art
standards and recognised safety regulations. Only use this
product when in technically perfect condition in accordance
with its intended use and the instructions explained in the user
manual.
Installation
- The installation of this product is exclusively reserved to well
authorised, trained and qualified engineers.
-
Use sufficient climbing gear and safety guards when working
on a higher level than 2 metres (local restrictions may
apply).
- Do not install the product in front of entrances and exits that
must be used for emergency services.
- Make sure the wall, ceiling or support system are strong
enough to carry the product.
Service, maintenance and repairs
- Obey the maintenance intervals given in this manual.
Overdue maintenance can lead to high costs for repair and
revisions and can render the guarantee null and void.
- Always use Personal Protective Equipment (PPE) to avoid
injury. This also applies for persons who enter the work area.
-
Use sufficient climbing gear and safety guards when working
on a higher level than 2 metres (local restrictions may
apply).
Personal protective equipment (PPE)
Wear respiratory protection and protective
gloves during service, maintenance and
repairs.
1. “Intended use” as explained in EN-ISO 12100-1 is the use for which the
technical product is suited as specified by the manufacturer, inclusive of his
directions in the sales brochure. In case of doubt it is the use which can be
deduced from the construction, the model and the function of the technical
product which is considered normal use. Operating the machine within the
limits of its intended use also involves observing the instructions in the user
manual.
4
INSTALLATION
4.1
Tools and requirements
You need the following materials to install the
product:
Duct >1 m Ø 200 mm/8 inch
(recommended)
Lifting and climbing gear; e.g.
- straps
- fork-lift truck + pallet
- scissor lift
Box spanner:
- SparkShield-250/10: M10 + M13
- SparkShield-400/16: M10 + M13
- SparkShield-500/20: M10 + M13 + M16
- SparkShield-630/24: M10 + M13 + M16
Duct support material
Electric drill + self-tapping screws
Existing duct:
- angle grinder; or
- electric drill
4.2
Unpacking
Make sure that the product is complete. The
package contains:
SparkShield-250 | 400 | 500 | 630:
- spark arrester, consisting of inlet with SparkTwist and outlet,
connected by duct clamp
- dustbin 13 litres
- dustbin 25 litres
-
dustbin cover incl. connection hose
For duct connection of the spark arrester:
- connection ring (2) Ø 250/400/500/630 mm
- duct clamp (2) Ø 250/400/500/630 mm
For connection of vertical duct Ø 200 mm (recommended)
between the spark arrester and the dustbin:
- connection ring (2) Ø 200 mm
- duct clamp Ø 200 mm
SparkShield-10 | 16 | 20 | 24:
- spark arrester, consisting of inlet with SparkTwist and outlet,
connected by duct clamp
- dustbin 13 litres (± ½ CF)
-
dustbin 25 litres (± ⅞ CF)
-
dustbin cover incl. connection hose
For duct connection of the spark arrester:
reducer (2) from metric Ø 250/400/500/630 mm to imperial
- Ø 10/16/20/24 in.
- duct clamp (2) Ø 250/400/500/630 mm
For connection of vertical duct Ø 8 in. (recommended)
between the spark arrester and the dustbin:
- reducer (2) from metric Ø 200 mm to imperial Ø 8 in.
- duct clamp Ø 200 mm
If parts are missing or damaged, contact your supplier.
