background image

OS-4 WRK

Sales office

Plymovent AB
Kopparbergsgatan 2
SE-214 44 MALMÖ
SWEDEN
Tel: +46 40 30 31 30
Fax: +46 40 30 31 40
[email protected]

© Plymovent AB reserves the right to make design changes.

 

Wireless Retrofit Kit

contents

England

Plymovent Ltd
Marley Way, Southam Road
Banbury, OX16 2RA, England
Tel: + 44 1295 25 93 11
Fax: + 44 1295 27 17 50
[email protected]

Canada
Plymovent Inc
24- 1200 Aerowood Dr
Mississauga, On L4W 2S7, Canada
Tel: +1 (905) 564-4748
Fax: +1 (905) 564-4609
[email protected]

USA

Plymovent Corp.
115 Melrich Road
Cranbury, New Jersey 08512, USA
Tel. + 1 609 395 3500 
Fax. + 1 609 655 0919
[email protected]

1. Safety .................................................................................. 2
2. Important safety instruction ........................................ 3
3. Introduction ..................................................................... 3
4. System components  ...................................................... 4
5. Installation......................................................................4-5
6. Reciever programming ................................................... 6
6. 1 Overview........................................................................6
6.2 Installation and Start-up...............................................7
6.3 System Test Mode.......................................................10
6.4 Operation.....................................................................11
6.5 Connect input / Output Cabling..............................11
6.6 Mount the Receiver.................................................... 12
6.7 Specifications................................................................12
6.8 Receiver Warrantee....................................................12
7. Wire Diagram ................................................................13
8. Operation .......................................................................14
9.  Warrenty ........................................................................14
10. Maintenance .................................................................14
11. Disposal ........................................................................14
12. CE Declaration.............................................................14

PRODUCT USER MANUAL

Thank you for buying a Plymovent product. Before you unpack and put it into operation please read this 

product manual carefully,  and follow the instructions.

This manual should be handed over and kept by the service department  

after the installation.

MAN_WRK_EN
5757-1011-100413:Rev1.1

Содержание OS-4 WRK















Отзывы: