0000110982/231018/A SER
EN - 2
GENERAL PRECAUTIONS
ATTENTION
Any fans or controls used with this hose reel may
contain ESD (Electrostatic Discharge) sensitive parts
and assemblies. Static control precautions may be
required when installing, testing, servicing or
repairing this assembly. Component damage can
result if ESD control procedures are not followed.
IMPORTANT USER INFORMATION
Read this document in entirety before you install, configure,
operate, or maintain this product. Plymovent systems are
made code compliant. Users are required to familiarise
themselves with installation in addition to requirements of all
applicable codes, laws and standards.
Activities including installation, adjustments, putting into
service, use, assembly, disassembly, and maintenance are
required to be carried out by suitably trained personnel in
accordance with applicable code of practice.
If this equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may
be impaired.
In no event will Plymovent be responsible or liable for indirect
or consequential damages resulting from the use or application
of this equipment.
The examples and diagrams in this manual are included solely
for illustrative purposes. Because of the many variables and
requirements associated with any particulate installation,
Plymovent cannot assume responsibility or liability for actual
use based on the examples and diagrams.
The operation of exhaust extraction systems can be affected
by various factors including but not limited to proper design of
the system, operating procedures, service and maintenance.
Exhaust exposure levels should be checked after the system is
installed and periodically thereafter to ensure that the air
quality meets applicable regulations and exposure limit values.
SHOCK HAZARD
Labels may be on outside or inside of equipment as
part of this exhaust removal system, such as fans or
control boxes, to alert people that dangerous
voltage may be present.
ARC FLASH HAZARD
Labels may be on outside or inside of the
equipment, such as the control box, to alert people
to potential Arc Flash. Arc Flash will cause severe
injury or death. Wear proper Personal Protection
Equipment (PPE). Follow ALL regulatory
requirements for safe work practices and for
Personal Protective Equipment (PPE).
BE SURE THAT ALL INSTALLATION, OPERATION,
MAINTENANCE AND REPAIR PROCEDURES ARE
PERFORMED ONLY BY QUALIFIED INDIVIDUALS.
