background image

E-20

Using USB Memory

The content of what has been drawn on the sheet surface of the network board can be saved in USB memory. 

Later, the saved image can be read into a personal computer and made into a document of the proceedings of 

the meeting, or affixed to a document.

The name of the folder on the USB memory device is “CB_Image”. Image files are stored in this folder. 

By factory setting upon purchase, image files are named “PV-xxx.pdf” (PDF files), where “xxx” refers to a 

3-digit number starting from 001 (ex.: PV-001.pdf).

Notice

•  No USB flash memory device is included. When purchasing a USB flash memory device, pay attention to the following:

1. USB flash memory devices formatted in FAT16/FAT32 are supported. USB flash memory devices in NTFS format cannot 

be used.

2. USB flash memory devices protected by a security function cannot be used.
3. USB flash memory devices with a capacity of over 32 GB cannot be used.
4. If the USB flash memory device is divided into multiple partitions, only one partition can be recognized with this unit.

USB Memory Storage Procedure

Preparation: 

Check that the network board’s AC power plug is connected to a wall power outlet.

Press the ON/Standby 

 button and switch on the power.

Note

•  When turning on the power, wait about 5 seconds or more after the power 

plug has been connected before pressing the ON/Standby button.

•  Press the ON/Standby   button to switch on the power. The LED of the 

display window will light.

Insert the USB memory device into the USB A Memory 

 

port of the network board. 

Notice

•  Check the side (polarity) of the USB mem

-

ory  device  before  inserting  it.  Forcing  it 
in  the  reverse  orientation  will  damage  the 
USB  A  Memory  port  or  USB  memory 
device. 

•  Be  careful  not  to  bump  into  the  USB 

memory  device  with  hand  or  body  while 
it is mounted. Doing so could damage the 
USB  memory  device  or  USB  A  Memory 
port. 

The procedure for displaying the sheet surface you want to store is the same as 
for printing.
See “Basic Printing Operation” on page E-16.

Note

•  The one screen portion that is viewable will be saved in USB memory. 
•  Saving of the portion located around the sheet surface might not be pos

-

sible. Please see “Effective reading size” on Page E-5. 

Press the Scroll/Stop 

 or 

 button to display the screen to 

be stored.

Содержание N-324



































Отзывы: