Re-imagine Beyond Technology
6.
MEDIA LAN 2110 CONTROL (out-band)
1)
Overview
Each SFP-H-7 Series Type C Plura monitor defaults to the PIPM input source which is set
to display an internally generated 'blue screen' test signal from the 2110 module. The video
format defaults to 1080i59.94
2)
Management via Control LAN UI
●
Open the Control LAN UI Media LAN 2110 Control (out-band) page. Refer to section
'Connecting to the Control LAN UI'.
●
The Media LAN 2110 Control has two-tab options for out-band control:
Main and Management. Figure 21 below shows the UI Main Tab.
●
In the Main tab there are fields to set the Video, Audio, and the Ancillary flows’
configuration. Each flow allows configuration of both its Primary and Secondary fields
and has an Enable check box. Adjustable fields include the destination IP address, the
destination port, and video format (for primary video only, secondary video format is
always the same as the primary video format).
Figure 21. Main Tab
●
The management tab offers both DHCP and Static IP configuration. To choose a Static
IP uncheck the DHCP check box (Figure 22). Once the Static IP values are entered click
on the submit button.
Operating Instructions19
SFP-H-7 SERIES with PIPM-R-7-TypeC
19
