PLP POWER MAX Dual Tilt Array Скачать руководство пользователя страница 5

Страница: 5 / 16

The Bracket is secured to the Tray, under the Module

Stop Bracket using the existing Flange Nut. Torque to

15 ft.-lbs.

Using the hardware provided in the Bracket Kit, attach

the Snake Tray to the Bracket using 5/16 x 3/4” Hex

Screw, Flat Washer and Flange Nut.

Tighten securely.

For more on Snake Tray see:

snaketray.com

The Z-Bracket Kit may be secured to either the Front

Bracket (as shown) or the Rear Bracket using the

existing Flange Nut. Torque to 15 ft.-lbs.

Using the hardware provided in the Z-Bracket Kit, attach
the Ratchet P-Clamp to the Z-Bracket.
Tighten securely.

For more on Ratchet P-Clamps see:

hellermanntyton.us

POWER MAX

Accessories Installation Guide, Tilted (5°, 10°), Dual Tilt and Flush Arrays

Installing Snake Tray

- Cable Runs (cont.)

Flush Array

Tilted (5° & 10°) Array - Utilizing PLP’s Z-Bracket Kit

Installing Ratchet P-Clamps - Conduit & Cable Runs

Snake Tray

is a registered trademark owned by Cable Management Solutions.

POWER MAX™ Accessories Installation Guide, Tilted (5°, 10°), Dual Tilt and Flush Arrays

Snake Tray

is a registered trademark owned by Cable Management Solutions.

Содержание POWER MAX Dual Tilt Array

















Результаты поиска

Содержание POWER MAX Dual Tilt Array

Отзывы:

Похожие инструкции для POWER MAX Dual Tilt Array

Бренды по названию

Популярные бренды

PLP POWER MAX Dual Tilt Array, Руководство по установке

Результаты поиска

Содержание POWER MAX Dual Tilt Array

Отзывы:

Похожие инструкции для POWER MAX Dual Tilt Array

Бренды по названию

Популярные бренды