PLP POWER MAX Dual Tilt Array, Руководство по установке

Страница: 10 / 16

Install Unistrut Rail
sections on north and
south rows, joining
the first two Edge
Trays of each row
together.
POWER MAX™ Accessories Installation Guide, Tilted (5°, 10°), Dual Tilt and Flush Arrays
Installing Unistrut Rails - Tilted (5° & 10°) Array only
Unistrut Rails are
used where design
loads are in excess
of 30 psf (650/lbs/
module).
Unistrut Rails
are only needed on
Tilted 5° &
10° systems with
excessive loads.
Dual Tilt systems
utilize a “shared
Peak Bracket”
which prevents any
outside edge rows
from slipping under
excessive loads.
NOTE
Item Description Qty Supplied By
1 3/8” x 1-1/4” Hex Bolt & Lockwasher - Stainless Steel 4 Customer
2 Channel Nut, Unistrut p/n P3008 or Equivalent 2 Customer
3 Square Washer, Unistrut p/n P1063 or Equivalent 2 Customer
4 Rail, Unistrut p/n P3300 or Equivalent N/A Customer
8