Plextor PX-800A, Инструкция по установке и эксплуатации

Страница: 35 / 94

Section 2. Installing the PX-800A Internal ATAPI Drive
PX-800A Installation and Users Manual
27
Mount the PX-800A Drive
Before proceeding to install the PX-800A drive in your personal
computer, double-check your jumper setting.
Record the Serial Number
Record the serial number of your drive on the inside front cover of this
manual.
Change the Front-Panel Color
If desired, you can change the PX-800A’s front-panel color by replacing
the bezel. See “Changing the PX-800A Front-Panel Color” on page 46
for a detailed procedure. Make this change before mounting your PX-
800A drive in the computer.
Mount the Drive in the Computer
You can mount your internal drive in any available bay. You must
remove the small panel that covers the bay that you want to use.
NOTE : The drive can be mounted horizontally or vertically
If you don’t have an empty bay, remove the existing IDE DVD-ROM or
CD-ROM drive and install the PX-800A.
You must make a minimum of two cable connections to your PX-800A.
The two cable connections that you must make are:
•
IDE cable
•
Power cable
There are also two optional cable connections:
•
An analog audio cable connection if you are using a sound board in
your computer and plan to connect the PX-800A’s audio output to
the audio connector on the sound board.
•
A digital audio cable connection if the sound board is equipped with
SPDIF or Digital-In and you wish to use the digital audio output
from your PX-800A.