Plextor PlexWriter 8/20, Руководство по эксплуатации, Страница: 53 / 88

PX-R820T OPERATION MANUAL
47
C:\TSCSI\MSCDEX.EXE /D:TSLCD /M:10
In this example, C:\TSCI is the path to MSCDEX.EXE. The path name will vary
depending on the type of SCSI device driver software you use. The D:TSLCD
refers to the device.
Change only the path of this line in your AUTOEXEC.BAT file so that it finds
the updated MSCDEX.EXE file in your DOS directory. This line should be
edited to read:
C:\DOS\MSCDEX.EXE /D:PLEX0001 /M:10
in DOS. Save the AUTOEXEC.BAT file and reboot your computer.
In Windows 3.1, the AUTOEXEC.BAT file would read:
C:\WINDOWS\COMMAND\MSCDEX.EXE/D:PLEX0001/M:10
and the CONFIG.SYS file would look something like this:
DEVICE=C:\SCSI\ASPI8DOS.SYS
(ASPI Manager for AHA2940 controller)
DEVICE=C:\SCSI\ASPICD.SYS /D:DEVICE_NAME
(ASPI Manager CD-ROM driver)
or
When using the Plextor driver (PLEXTOR.SYS) instead of ASPICD.SYS:
DEVICE=C:\PROGRA~1\PLEXTOR\PLEXTOR.SYS /D:DEVICE_NAME
(ASPI Manager CD-ROM driver)
Symptoms Additional Symptom
• No device found • Driver fails to recognize the SCSI
• No SCSI interface board found interface board
or no response from SCSI
interface board
Possible Cause and Solution
Drive Not Resetting
In some cases, even if you restart the computer by pressing its reset button or
the Control, Alt, and Delete keys simultaneously, the drive does not appear to
respond. Try turning the power switches on the drive and computer OFF, then
ON. This complete shutdown should fully reset the drive and computer.
CHAPTER 12 — Troubleshooting