manualshive.com logo in svg

Plextor PlexWriter 8/20, Руководство по эксплуатации, Страница: 41 / 88

Поделиться
Скачать
Plextor PlexWriter 8/20 Скачать руководство пользователя страница 41

PX-R820T OPERATION MANUAL

35

Using CD-ROM/CD-R

Discs and Trays

YOUR TASK:

Learn how to handle, load, and care for your discs.

YOUR OBJECTIVE:

Protect your discs. Insert and eject discs properly so
your drive operates without interruption.

YOUR METHOD:

Practice loading discs into trays.

Tray Loading and Operating

1) While the drive is powered up, push the Eject button. The tray drawer

will slide out in 2–3 seconds.

2)  Lay the bare CD into the

depression in the tray, label side
up. The CD should lay flat in the
drive; you do not need to use the
clips in the tray. 

3) Press the Eject button again and

the tray will slide shut within
seconds.

NOTE:

We recommend you use the Eject button to close the tray in a smooth
and secure manner. Closing the tray by pressing the front of the
drawer by hand is not recommended and risks damage or premature
wearing of the mechanism.

— CHAPTER 10 —

Содержание PlexWriter 8/20

























































































Отзывы:

Нет отзывов