Plextor PlexWriter 8/2/20, Руководство по эксплуатации

Страница: 26 / 76

Section 2. Installing Your PlexWriter
22
PlexWriter 8/2/20 Operation Manual
Figure 9: Removing the Cover Plate
6. Plug the SCSI interface board into the slot you have selected. Rock the board
from end to end to ensure that it seats firmly in the slot. Don’t force it. If you
cannot push the board down completely into the slot, remove the board and try
again.
7. Once you have successfully inserted the board, fasten it in place using the cover
plate screw that you removed earlier.
Install an Internal PlexWriter Drive
This section explains how to install an internal PlexWriter drive in a PC. If you have
an external drive, go to the section titled “Install an External PlexWriter Drive” on
page 28.
Before proceeding, double-check your SCSI number setting, SCSI termination
setting, and other jumper-controlled settings.
Record the Serial Number
Record the serial number and TLA code of your drive on the inside front cover of
this manual.
Mount the PlexWriter Drive
You can mount your internal PlexWriter drive in any available bay. You must
remove the small panel that covers the bay that you want to use.
CAUTION : Install your PlexWriter horizontally. Plextor does not guarantee drive’s
performance in a vertical position.