background image

PlexWriter 52/24/52A Installation and Users Manual  

1

 

1. Getting Started 

Congratulations! Thank you for purchasing the Plextor

®

 PlexWriter

 52/24/52A, a 

reliable, high-performance CD writer, CD rewriter and CD player. We appreciate the 
confidence you have shown in us. Our goal is to put you—and keep you—on the 
leading edge of CD technology.  

About this Manual 

Please read this manual carefully and keep it handy for easy reference. Use the 
manual for installation, operation and troubleshooting. If your drive needs service, 
see your dealer or call Plextor’s Technical Support Department. 

 

In this manual you should find all the information you need to successfully install, 
operate and troubleshoot your drive. If you run into a problem that doesn't seem to be 
covered, however, please contact us. (See “Appendix B: Technical Support” for the 
different ways you can reach us.) You will be connected to our friendly, helpful band 
of tech support engineers. What might seem like an uncooperative drive to you could 
very well be a 30-second fix to them. But we will never know unless you contact us.  

Meet Your PlexWriter 52/24/52A 

The PlexWriter 52/24/52A is a CD-ReWritable drive that provides professional 
quality CD performance for writing, rewriting and reading.  

What the PlexWriter 52/24/52A Does 

The PlexWriter 52/24/52A: 

• 

Writes to CD-R (recordable CD) media at up to 52X speed.  

• 

Writes to Ultra Speed CD-RW (rewritable CD) media at up to 24X speed. The 
drive also writes to High Speed CD-RW media at 4X and 10X, and to Normal 
Speed CD-RW media at 4X speeds.  

• 

Reads all CD-ROM and CD-R media at a maximum of 52X speed. 

 

Содержание PlexWriter 52/24/52A





























































Отзывы: