Section 1. Getting Started
6
PlexWriter 40/12/40U Installation and Users Manual
Rear Panel
Figure 2: Rear Panel of the PlexWriter 40/12/40U Internal Drive
•
Analog audio output connectors: Output of analog stereo signal. Connect a
sound board or audio amplifier here, if desired. Connectors are standard RCA
type.
•
Power switch: Press this switch to turn power on or off. Press the “0” down to
turn power off, “1” to turn power on.
•
Power connector: Connect the AC Adapter here.
CAUTION: Use only the AC Adapter shipped with your PlexWriter.
•
USB connector: Connect the USB cable here.
CAUTION: Use only the USB cable shipped with your PlexWriter.
•
Self-test switch: For normal operation, set this switch to ON. To have the
PlexWriter execute its self-test routine, disconnect the USB cable from the drive
and set this switch to SELF TEST.