➏
ON/BUSY Indicator
: Yellow when power is on. Flashing when disc is inserted
and being accessed. Off when disc is inserted and not being accessed.
❼
DISC IN Indicator:
Green when power is on and disc is inserted. Off if no disc
is inserted.
❽
Volume Control:
Controls volume of headphone jack. This control has no effect
on the rear panel audio outputs.
❽
Headphone Jack:
Stereo mini-jack for headphones and powered speakers.
PX-63CS Internal Drive----
REAR PANEL
➊
Audio Output Connector:
Outputs stereo analog signal. Use to connect to sound-
board or audio amplifier.
➋
SCSI Interface Connector:
Connects to SCSI interface board using 50-pin to
50-pin flat ribbon SCSI cable.
➌
Jumpers:
Use to select SCSI ID number, parity, term, test, block size and eject
lock options. Leave these jumpers at their factory settings unless one or more of the
following situations pertain to you:
SCSI ID number:
If you are using more than one SCSI peripheral, you may have
to change your SCSI ID number. See page 15.
Block size:
If you are working in a UNIX environment and want to boot from your
CD-ROM drive, see page 17.
Eject lock:
If you work in an environment where you need to prevent others from
easily removing a CD-ROM disc from your drive, see page 17.
➍
Power Connector:
Connects to your computer’s power supply (DC +5V and +12V).
9
CHAPTER 5 ---- Drive Features
➊
Audio Output Connector
➋
SCSI Interface Connector
➌
Jumpers
➍
Power Connector
10
PX-63CS/PX-65CS OPERATION MANUAL
