If you purchased your SCSI interface board several months or years before
you purchased your 6PleX drive, you may need to update your device
drivers. See the discussion about device drivers in Chapter 9 of this manual.
3) You own a soundboard that has a SCSI interface built into it (e.g., Sound
Blaster SCSI II).
You may need to use the SCSI cable and, most important, the audio cable
we have included with your 6PleX (see page 33 for a discussion on audio
cables). If you have an external drive you will also need a special bracket
connector and an internal SCSI cable. These should have been provided by
the soundboard manufacturer. They allow the internal SCSI connector on
your soundboard to be linked or connected to your external drive. If they
were not provided by your soundboard manufacturer, you will need to
purchase them from a local computer supply store.
You also may need to update your device drivers. See the discussion about
device drivers in Chapter 9 of this manual.
Once you have assembled everything you need, you’re ready to install your drive.
But first, a few words of caution are in order.
CHAPTER 3 ---- What Else Do I Need?
PX-63CS/PX-65CS OPERATION MANUAL
7
