Plexon Stimulator 2.0, Руководство пользователя

Страница: 14 / 60

Neurotechnology Research Systems
Stimulator 2.0 - 14 -
4.4 Turning on the power for the first time
4.4.1
Turn the power supply on. The six LEDs on the front of the power supply and the one LED
on the front of the stimulator should illuminate.
4.4.2
The first time you turn the stimulator on a “Found New Hardware” balloon will appear in
the lower right hand corner of the computer screen. In Windows 7, the balloon changes
from “Installing device driver software” to “Your device is ready to use”. In Windows XP,
the balloon cycles through several different displays including “Plexon Stimulator”, “USB
Composite Device”, and “USB Serial Converter X” where X is successively A, B, C, then D:
Windows 7: Windows XP:
…
(repeats for USB Serial Converter B, C, D)
…
4.4.3
If the “Found New Hardware Wizard” appears, then the drivers for the stimulator are not
properly installed. Refer to section 4.1 for the driver installation procedure.