Operational Manual Plettenberg Motor control MST-60-80 V5.1
S. 3
1
Introduction :
This manual describes the features, installation and operation of
Plettenberg motor control MST60-80.
Please read the instruction manual carefully and completely before
using the controller. Disregarding the hints and instructions can be fatal
and can cause lethal injuries! The limitation of the length of the battery
input cables is mandatory(see chapter 4).
If you have questions please do not hesitate to contact us.
The engine control MST60-80 has been specially developed for the use
with brushless Plettenberg electric motors with sensors. Brushless
motors from other manufacturers can only be connected, if they are
equipped with 3 Hall sensors in 120 ° electrical arrangement. We
assume no guarantee for the proper functioning of the MST60-80 with
motors from other manufacturers.
The MST60-80 can drive brushless motors electrically up to 240000 rpm.
A 20-pole motor, for example, makes 10 electrical revolutions doing one
shaft rotation. The maximum speed for such a 20-pole motor is
calculated: 240000rpm / 10pole pairs = 24000rpm.
The powerful 32-bit microprocessor allows a sensitive and fast motor
control in conjunction with a very universal use. The measured values
are displayed in real time on the RS232 interface in plain text so that
they can be evaluated with a PC or other microprocessor control easy.
The firmware of the MST60-80 can be updated. However, it has to be
sent to the factory for update.
