Platinum Z5 CD, Руководство пользователя

Страница: 56 / 194

3-2 888-2408-002
WARNING: Disconnect primary power prior to servicing.
Operator Guide
3.2 Transmitter Controls
The transmitter controls are mostly on the right half of the controller front panel at
the top of the transmitter, See Figure 3-1. These controls and their function are listed
below.
OFF - Used to turn the transmitter off
ON - HIGH - Turns the transmitter on to the previous HIGH setting. If the
transmitter has folded back power automatically, due for instance to high VSWR,
pressing the HIGH button will return the transmitter to the normal high power level
provided the cause of the foldback is gone.
ON - LOW - Turns the transmitter on to the previous LOW setting. If the transmitter
has folded back power automatically, due for instance to high VSWR, pressing the
LOW button will return the transmitter to the normal low power level provided the
cause of the foldback is gone.
POWER (up/down arrows) - used to raise and lower the transmitter power.
REMOTE DISABLE - (Located on the left side of the controller) used to disable
any remote control system which is connected to the transmitter. When the LED is
lit, the remote control inputs are disabled.
NOTE:
Some of the less often used transmitter controls, such as calibration and con-
figuration, are located in the menu screens of the Diagnostics system. These
are covered as part of the Diagnostics system later in this section.