Installation and user guide PLATINUM
®
inverter 5500 R3-S2, 7000 R3-S2, 8000 R3-S2, 9000 R3-S2
6.5 Service menu
6.5.1 Call up service menu
1. Call up the main menu with the
ESC
button.
2. Select the Settings menu with the
/
buttons and confirm with
OK
.
3. Hold both the
and
buttons down together for around three seconds.
The service menu is displayed and the Event list menu option is selected.
4. Select the menu required using the
/
buttons
.
6.5.2 Overview of the service menu
Event list
See section 8.2
Parameters
See section
Initial op. date
Show initial operation date
Energy meter
Show energy fed in since initial operation
New configuration
See section 4.3
MPP mode
See section 6.5.4
Grid support
See section 6.5.5
Power reduction *
See section 6.5.6
* This menu can only be changed for a period of 4 hours after initial
configuration.
6.5.3 Parameters service menu
In some supply areas, the values for supply voltage and frequency sometimes or
always differ from the factory settings. PLATINUM
®
inverters can be adapted to these
values. For more information, contact the PLATINUM
®
service.
The Parameters service menu shows the parameters set, the country code and the
valid guidelines. The parameters are structured in several levels, with the specific value
displayed on the lowest level.
Parameters can only be modified by certified persons with the
PLATINUM
®
service tool.
34
Menu
