background image

28

29

Measurement 

Technology

Time Domain Reflectometry (TDR)

Cable  

Measurements

Cable Testing and ID: up to 1000 ft (305 m)

Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)

Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft)

Supports 8 continuity and ID number remotes (RJ-45)

Supports 20 RJ-45 and 20 F-Connector ID only remotes

Power over 

Ethernet 

Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus)  

compliant PoE

Tests for classes and loads cable up to 25.5 watts  

(at class 4) Identifies Mode A or B (pairs with PoE)

Active Ethernet 

Indicates advertised speeds of 10/100/1000base-t half  

or full duplex 

Can Link to network at 10/100base-t

Maximum Voltage

Parameters refer to the maximum voltage that can be applied to 

any 2 connector pins without causing damage to the tester

RJ Jack: 66 VDC or 55 VAC
F-connector: 50 VDC or VAC

Save Test Results

Stores up to 256 Cable or network tests with user defined 

names

Tone Generation

Tone Frequencies: 730 Hz and 1440 Hz

Languages

English, French, Spanish, German, Italian

Battery Life

For 6 x AA, 9 VDC, 2,200 mA-hr (typical) alkaline battery:

Operating – 20 hours typical 

Standby – 1.5 years typical  

(200uA max standby current) 

Batteries are included

Altitude

10,000 ft (3048 m) operating

Temperature

Operating: 32 to 122°F (0 to 50°C) 

Storage: -22 to +140°F (-30 to 60°C)

Humidity

10 to 90% non-condensing

Enclosure

High-strength PC/ABS plastic with V0 rating with boot 

Withstands 4 foot drop on to concrete

Size 

1.85”H x 3.6”W x 6.8”L (4.7 x 9.15 x 17.3 cm)

Weight

With batteries: 1 lb 2 oz (510 g)

Safety  

Compliances

Warranty

1 Year

SPECIFICATIONS

Contacting Platinum Tools

For technical information and customer support, please visit  
www.platinumtools.com or send an email to 

[email protected].

Contact Numbers:

  

Phone: 805.384.2777 • 800.749.5783

Address:

    

2450 Turquoise Circle

 

 

Newbury Park, CA 91320

  USA

CUSTOMER SERVICE

Содержание Net Prowler TNP800

















Отзывы: