25
• Locate the “U” section end capping channels and
fixing pins.
• Cut a small section of end capping channel to suit
the end of each extended plank wall top plank. Nail
into position with the nail passing through the hole
left free in the metal corner brace..
• Cut longer sections to suit the two rows of planks
ends on each corner of the pool. Note you will
need 8 shorter lengths of trim and 8 longer lengths
to allow for the half planks on alternate walls.
• Nail the trims into place.
[See Figure F06]
Fitting the End Capping Channel
Figure F06
