PLASMATECH SHARK 105, Руководство оператора

Страница: 4 / 54

4
SHARK 75 technical characteristics
The powerful, compact SHARK 75 model is a plasma unit that
satisfies the needs of medium / light metalwork most fully.
The cuts are always precise and ensure high cutting stand-
ards in any situation.
High quality and cutting speed thanks to the SK 75 torch, with
(HPC) High Performance Cutting technology, which ensures a
concentrated, powerful plasma beam.
Further particular features of this machine include:
• SK 75 torch with (HPC) High Performance Cutting technol-
ogy and coaxial cable.
• Powerful, compact and light-weight, only 22,8 kg.
• High productivity thanks to high cutting quality and speed.
• Lower operating costs due to the long lifespan of consum-
ables.
• “Energy Saving” function that starts ventilation of the gener-
ator only when necessary.
• Electrical protective device on the torch to guarantee the op-
erator’s safety.
• The possibility of automated CNC cutting, using the SHARK
75-M version, fitted with a straight SKM 75 torch.
The technical data for this equipment is summarized in the ta-
ble 1.
Table 1
Model SHARK 75
Three-phase power supply 50/60 Hz
V 400
Mains supply: Z
max
Ω 0,107
Power input @ I
2
Max kVA 11
Delayed fuse (I
2
@ 100%)
A 16
Power factor / cosφ
0,87 / 0,99
Efficiency degree η 0,85
Open circuit voltage (peak)
V 300
Current range
A 20 ÷ 70
Duty cycle @ 100% (40°C) A 55
Duty cycle @ 60% (40°C)
A 65
Duty cycle @ 40% (40°C)
A 70
Cutting capacity
recommended
maximum
severance
piercing
mm
mm
mm
mm
20
25
30
15
Type of machine intake air/gas
AIR - Clean, dry,
oil-free for ISO 8573-1
Class 1.2.2
N2 - 99.95%
Air pressure
5,0 ÷ 5,5
Air flow
180 ÷ 210
Standards
IEC 60974-1
IEC 60974-7
IEC 60974-10
Protection class IP 23 S
Insulation class
F
Dimensions mm 595-390-185
Weight kg 22,8
WARNING:
This equipment complies with
EN/IEC 61000-3-12
pro­
vided that the maximum permissible system impedance Z
max
is less
than or equal to 0,107 at the interface point between the user’s sup­
ply and the public system. It is the responsibility of the installer or user
of the equipment to ensure, by consultation with the distribution net­
work operator if necessary, that the equipment is connected only to a
supply with maximum permissible system impedance Z
max
less than
or equal to 0,107.
This system, tested according to
EN/IEC 61000-3-3 , meets the re­
quirements of EN/IEC 61000-3-11 .
SHARK 105 technical characteristics
The powerful, compact SHARK 105 model is a plasma unit
that satisfies the needs of medium / light metalwork most fully.
The cuts are always precise and ensure high cutting stand-
ards in any situation.
High quality and cutting speed thanks to the SK 125 torch, with
(HPC) High Performance Cutting technology, which ensures a
concentrated, powerful plasma beam.
Further particular features of this machine include:
• SK 125 torch with (HPC) High Performance Cutting technol-
ogy and coaxial cable.
• Powerful, compact and light-weight, only 23,9 kg.
• High productivity thanks to high cutting quality and speed.
• Lower operating costs due to the long lifespan of consum-
ables.
• “Energy Saving” function that starts ventilation of the gener-
ator only when necessary.
• Electrical protective device on the torch to guarantee the op-
erator’s safety.
• The possibility of automated CNC cutting, using the SHARK
105-M version, fitted with a straight SKM 125 torch.
The technical data for this equipment is summarized in the ta-
ble 2.
Table 2
Model SHARK 105
Three-phase power supply 50/60 Hz
V 400
Mains supply: Z
max
Ω 0,109
Power input @ I
2
Max kVA 15
Delayed fuse (I
2
@ 100%)
A 16
Power factor / cosφ
0,90 / 0,99
Efficiency degree η 0,85
Open circuit voltage (peak)
V 300
Current range
A 20 ÷ 100
Duty cycle @ 100% (40°C) A 70
Duty cycle @ 60% (40°C)
A 90
Duty cycle @ 40% (40°C)
A 100
Cutting capacity
recommended
maximum
severance
piercing
mm
mm
mm
mm
30
35
40
20
Type of machine intake air/gas
AIR - Clean, dry,
oil-free for ISO 8573-1
Class 1.2.2
N2 - 99.95%
Air pressure
5,0 ÷ 6,0
Air flow
280 ÷ 330
Standards
IEC 60974-1
IEC 60974-7
IEC 60974-10
Protection class IP 23 S
Insulation class
F
Dimensions mm 595-390-185
Weight kg 23,9
WARNING:
This equipment complies with
EN/IEC 61000-3-12
pro­
vided that the maximum permissible system impedance Z
max
is less
than or equal to 0,107 at the interface point between the user’s sup­
ply and the public system. It is the responsibility of the installer or user
of the equipment to ensure, by consultation with the distribution net­
work operator if necessary, that the equipment is connected only to a
supply with maximum permissible system impedance Z
max
less than
or equal to 0,107.
This system, tested according to
EN/IEC 61000-3-3 , meets the re­
quirements of EN/IEC 61000-3-11 .