Planmeca PlanMill 40 S, Руководство пользователя, Страница: 7 / 32

Planmeca PlanMill 40 S User Manual Operating the Mill 7
Operating the Mill
Pending Jobs
The Pending Jobs list is the default screen.
Always wait until the lid lights turn green before making any selections on the touch screen.
1
Scroll to find the desired restoration by dragging a finger up and down the restoration list. Touch the desired job to select it.
2 The system opens the lid and prompts you to insert the block that matches the material selected in the Design software.
Touch the Stop button to return to the jobs list.
Inserting Blocks
Blocks can be inserted vertically or horizontally. The Insert Block screen specifies the block orientation. Notice the notches face
right in the examples below. If the notch is pointing to the left, you will not be able to insert the block. Round blocks use the
vertical orientation of the mandrel.
The mandrel is the metal piece of the restoration block that is inserted into the mill to hold the block steady
during milling.