Planmeca PlanMill 40 S, Руководство пользователя, Страница: 26 / 32

Planmeca PlanMill 40 S User Manual Importing for Milling 26
Milling Settings
Milling Settings only affect proposals with a sharp interior angle, like an anterior incisal edge. If the interior of the proposal is
smaller at the tip than the tools in the mill, the
Standard
setting removes extra material at the tip. This may lead to a crown that is
too thin at the top. The options are to round the preparation or to select
Undermill.
If
Undermill
is selected, then the mill will go
as far as the tool’s size will allow and the remainder must be removed manually.
1
2
3
1
4
3
Proposal
Standard
Preparations
Undermill
Simulation Settings
Click
Settings
on the Mill tab to view/edit the
Simulation Settings.
The default selection is
Speed.
This
will give you a faster simulation. Select
Quality
for a more accurate simulation, but be aware that it will take
longer to process. Note that when the design software is restarted, it will return to the default Speed setting.
Mill time is displayed in the information when Quality simulations are processed.