Copyright Planika Sp. z o.o.
www.planikafires.com
IG0058#00
31.03.2017
17
•
Press the
button again. Desired temperature of the first period
flashes.
•
Using the arrow keys
or
set the correct temperature and time
on the remote control.
•
Press the
button again and repeat the above steps to set the
desired start time and the setpoint temperature for all periods and
days.
•
It is also possible to shut down the device at specific time in the current
set period. To do this, select „
--,-
"
when setting the desired
temperature.
7.
INSTALLATION MENU
The following options are available in the installation menu:
•
Time format of 12-hour or 24-hour,
•
Time Schedule (1 day, 5 + 2, 7 days),
•
The number of periods during each day (II, IV or VI).
To activate the Installation menu you should exit the User Menu (if it is enabled), and then press and hold the button
for 10 seconds. You can leave Installation Menu after pressing the button
or after waiting five seconds of
pressing last button.
7.1.
Time format of 12-hour or 24-hour
To change the time display format:
•
Press and hold the button
for 10 seconds. The currently selected time display format starts flashing.
•
Change the format of the time display by pressing the arrow buttons on the remote control
or
.
