Planex RX-35U, Руководство пользователя

Страница: 10 / 22

3. Attach the metal fittings for 2.5" HDD (that have been removed) to the
HDD case, and reattach the jacket that was removed in Step 1. The
hardware installation is now complete.
1. Firmly hold the lower part of the HDD case, and pull up the portion
indicated by the arrow (see below) to remove the jacket.
10 9
1. Firmly hold the lower part of the HDD case, and pull up the portion
indicated by the arrow to remove the jacket (see below).
2. Remove the metal fittings for 2.5"HDD from the HDD case. Then attach
an IDE cable (a wide 40 pin cable) and power connector to your 3.5"
HDD, and insert the HDD into the HDD case. Align the screw holes on
the sides of the 3.5" HDD with the screw holes on the sides of the HDD
case, and secure the HDD with the supplied screws.
Mounting a 3.5" HDD to the HDD Case
Mounting a 2.5" HDD to the HDD Case
2 1
2 2
RX-35U/RX-35U3 RX-35U/RX-35U3
new-RX-35U7-27 8/3/2000 12:48 PM 頁面 19