Planex Mini300 Скачать руководство пользователя

Страница: 10 / 75

Mini300

The Mini300 Print Server fully supports 10BASE-T IEEE802.3 and

100BASE-TX IEEE802.3u standards. The print server is equipped with 1)

one Centronics parallel port which directly attaches to the parallel port of a

printer and 2)one RJ-45 STP port for 10BASE-T (and 100BASE-TX for

Mini100) network connection. The Mini300 supports TCP/IP, IPX/SPX,

NetBEUI and AppltTalk protocols. Equipped with these features, the

Mini300 print server allows multiple computers to share a single printer.

Supported platforms/ networks include NetWare, Macintosh, Microsoft

WindowsNT, Windows95/98 peer-to-peer networks as well as a number of

UNIX-based systems and Linux distributions. Furthermore, the supplied

setup utility for Windows eases all the configuration tasks.

Note:

Some printers with bi-directional print support may not function properly

when used with the print server. If this is the case, please refer to the user’s

manual of your printer to disable the bi-directional communication feature.

Please also note that printers with PostScript (PS) support are required to

print from Macintosh computers. Printers without PS support do not work

properly when used with the print server.

Product Overview

Chapter 1

Introduction

Содержание Mini300












































































Результаты поиска

Содержание Mini300

Отзывы:

Похожие инструкции для Mini300

Бренды по названию

Популярные бренды

Planex Mini300, Руководство пользователя

Результаты поиска

Содержание Mini300

Отзывы:

Похожие инструкции для Mini300

Бренды по названию

Популярные бренды