Planex GW-DS300N Скачать руководство пользователя страница 62

Страница: 62 / 78

GW-DS300N

Off

: Always send frame without protection.

Beacon(ms)

The time between two beacons. System default is

100 ms.

TX Power Please manually choose the transmitting power for

GW-DS300N.There are“

100%

75%

50%

25% and Lowest

”. The system default is 100%

which means GW-DS300N has the maximum TX

Power on wireless network.

Idle time(60 - 3600)(s Idle Timeout means a period of idle time before

you go offline. Enter a maximum period of time

(seconds) to define the maximum idle time. If the idle

time is above the defined maximum idle

TX Rate

There are several options including

Auto/1/2/5.5/11/

6/9/12/18/24/36/48/54

Mbps for you to select. When

“

Auto

”is selected, the device will choose the most

suitable transmission rate automatically. The higher

data rate you designated in the network, the shorter

distance is allowed between the adapter and the AP.

When the wireless mode is“

802.11 B only

”, the

maximum data rate is 11Mbps (11b) so that there are

only “

Auto/1/2/5.5/11Mbps

” options you can select.

Channel

Scroll down the list to choose a channel for the AP.

The default setting is channel 1.

Security Setting Click this button and then to set up the authentication

and security of the AP. The detailed configuration is

shown in the“

4.3. Security Setting

”.

Содержание GW-DS300N















































































Результаты поиска

Содержание GW-DS300N

Отзывы:

Planex GW-DS300N, Руководство пользователя, Страница: 62 / 78

Результаты поиска

Содержание GW-DS300N

Отзывы: